|
Post by Mickey on Dec 26, 2006 21:16:36 GMT -4
Justin, Mickey's family is sorry to hear about the lost of your love one.
As for you Tia, you have discovered a new trail. We all know that you will explore it throughly. You lead into that trail and we will follow you until we know that you are safe on the highway to heaven. Keep in touch on CH16.
Our condolences to Tia' family and to you Justin. Mickey
|
|
|
Post by Mickey on Dec 24, 2006 15:57:45 GMT -4
Tia hang tight girl.
Mickey's family is right there behind you to give you that little push that you might need. And my 3 ragdolls cats, Binx, Ty and Molly can not wait to meet your's and of course the sooner the better.
Hence, put that body of your in 4 low and come out of that deep hole slowly but surely.
This is X-Mass eve, so we will see you in the New Years
To your family and friends our prayer are there
"Un petit copain" Mickey
|
|
|
Post by Mickey on Nov 11, 2006 15:38:33 GMT -4
I am still trying to get rid of my 89 XJ Jeep. If anyone does not come to get it (For spare parts). It is going to the razor blade factory.
But first, I need a couple of winch to move it out of my driveway to down the road. YES YES, of course the beer will be available to whom come to help.
Perhaps next weekend would be good. Drop me a line or a ring, I live in Beaver Bank 865-5004 (H) or 221-7836 (C)
Mickey
|
|
|
Post by Mickey on Oct 21, 2006 19:14:53 GMT -4
I had the same thing happened to me earlier this summer but the damage was 4 days after I flooded the engine. The con-rod put a hole the size of my fist on the side of the block by #1 piston Mickey
|
|
|
Post by Mickey on Oct 21, 2006 19:18:55 GMT -4
sorry the trip just been cancelled Mickey
|
|
|
Post by Mickey on Oct 20, 2006 21:04:13 GMT -4
Anyone that has something to go to Cape Breton or the otherway, I am leaving Friday PM 27 Oct. returning Sunday AM.
If I can help drop me a line. Mickey
|
|
|
Post by Mickey on Oct 7, 2006 7:07:44 GMT -4
So exactly what size socket do I need for the bearing (the big one in the center)and the axles stud (small ones in the back)? Mickey
|
|
|
Post by Mickey on Oct 7, 2006 7:07:03 GMT -4
So exactly what size socket do I need for the bearing (the big one in the center)and the axles stud (small ones in the back)? Mickey
|
|
|
Post by Mickey on Oct 6, 2006 19:47:35 GMT -4
I have to remove a right front axle from my spare jeep, 89 XJ. I looked to buy a socket 12 points, 1/2 drive tonight at 2 Canadian tires, Napa and R&A, but no luck. So anyone who has the right tools for the job = the beers is on. And if there are any parts that you need, you have a deal.
Mickey 865-5004 Beaver Bank
|
|
|
Post by Mickey on Sept 30, 2006 21:29:05 GMT -4
Tony I raced for 2 seasons, I took a trophy home every race I did. Best time I ever had (at sometime I described it as better than sex, well it is only an expression.....) no comments please. Actually if you need a roll cage or anything else I have you can have mine, the racing jeep is going to scrap this week or so call me 865-5004 0r 221-7836 Mickey
|
|
|
Post by Mickey on Sept 29, 2006 20:32:09 GMT -4
Is someone can explain me how to add a picture? I tried cut and paste but it did not work. Mickey
|
|
|
Post by Mickey on Sept 30, 2006 21:34:19 GMT -4
Hey Andre As you still have my jeep, do you reckon you could fit those instead of my 35"? Just a thought. Mickey
|
|
|
Post by Mickey on Jul 12, 2006 19:36:56 GMT -4
Anyone has something to go or pick up from PEI. I am leaving Thursday at 2 PM going to PEI (everywhere) and returning back to Lower Sackville NS. on Saturday Late PM. If it is not too, too big I will be more than happy to transport it for you.
Call Mickey tonight or tomorrow morning you can leave a Msg, 902-865-5004
|
|
|
Post by Mickey on Mar 19, 2006 21:00:17 GMT -4
Thank you Beth Too bad that my email attachment did not work. If so it would had confused, and upset the cash box of the new club treasurer (I think that is the way it is spelled) Mickey
|
|
|
Post by Mickey on Mar 12, 2006 7:14:43 GMT -4
Any one can tell who that driver could be in our Jeep club? I could probably guess who it is, if he would be driving a YJ or TJ, but a Cherokee....
Mickey
A shepherd was herding his flocks in a remote pasture when suddenly a brand new Jeep Cherokee advanced out of a dust cloud towards him. The driver, a young man in a Brioni suit, Gucci shoes, Ray Ban sunglasses and a YSL tie leaned out of the window and asked our shepherd: "If I can tell you exactly how many sheep you have in your flock, will you give me one?" The shepherd looks at the yuppie, then at his peacefully grazing flock and calmly answers "sure!" The yuppie parks the car, whips out his notebook, connects it to a cell-phone, surfs to a NASA page on the Internet where he calls up a GPS satellite navigation system, scans the area, opens up a database and some 60 Excel spreadsheets with complex formulas. Finally he prints out a 150 page report on his hi-tech miniaturized printer, turns round to our shepherd and says: "you have here exactly 1586 sheep!" "This is correct. As agreed, you can take one of the sheep" says the shepherd. He watches the young man make a selection and bundle it in his Cherokee.
Then he says: "If I can tell you exactly what your business is, will you give me my sheep back?"
"Okay, why not" answers the young man. "You are a consultant" says the shepherd.
"This is correct" says the yuppie, "How did you guess that?"
"Easy" answers the shepherd. "You turn up here although nobody called you. You want to be paid for the answer to a question I already knew the solution to. And you don't know @$#% about my business because you took my dog."
|
|